Selecting a language, Selecting a language, first time, Selecting a language, anytime – Kodak CX7310 User Manual
Page 12: Setting the date and time, Setting the date & time, first time, Setting the date & time, anytime, Selecting a language setting the date and time

Getting started
5
www.kodak.com/go/support
Selecting a language
Selecting a language, first time
The Language screen is displayed the first time you turn on the camera.
■
Press
to highlight a language, then press the OK button.
The Set Date & Time screen is displayed in the current language (see
Selecting a language, anytime
1 In any mode, press the Menu button.
2 Press
to highlight Setup Menu
, then press the OK button.
3 Highlight Language
, then press the OK button.
4 Highlight a language, then press the OK button.
5 Press the Menu button to exit.
The text is displayed in the selected language.
Setting the date and time
Setting the date & time, first time
The Date & Time have been reset message appears after the Language screen
the first time you turn on the camera. It may also appear if the batteries are
removed for an extended time.
1 SET DATE & TIME is highlighted. Press the OK button.
(Select CANCEL to set the date and time at a later time.)
2 Go to Step 4 below,
Setting the date & time, anytime
Setting the date & time, anytime
1 In any mode, press the Menu button.
2 Press
to highlight Setup Menu
, then press the OK button.
3 Highlight Date & Time, then press the OK button.
4 Press
to adjust the date and time. Press
to advance to the
next setting.