AEG KO-LAVAMAT 72640 - Manual (Page 19)

Operating Instructions
19
Changing the spin speed/Selecting the
rinse hold function
If required, change the spin speed for the final
spin/select rinse hold:
Changing the spin speed
0 Continue pressing the spin speed/
o (RINSE
HOLD) button until the indicator for the desired
spin speed is illuminated.
3 If you do not change the spin speed, the final spin
will be adjusted automatically depending on the
type of wash cycle:
The speed for the intermediate spin cycle is dependent on the wash cy-
cle selected and cannot be altered.
Selecting the rinse hold function
0 Continue pressing the spin speed/
o (RINSE HOLD) button until the
indicator
o (RINSE HOLD) for the desired spin speed is illuminated.
3 If
o (RINSE HOLD) is selected, the washing will remain in the final
rinse water and will not be spun.
The washing will not be spun throughout the entire wash cycle.
As a result the cycle is a very quiet one.
o (RINSE HOLD) is therefore
especially suitable for washing at night.
Note: The laundry remains lying in the water until you drain or spin
(see section “Ending a wash cycle”). After 18 hours however, it is auto-
matically drained and pumped.
–
t (COTTONS/LINEN)
1200 revolutions per minute
–
} (EASY CARES)/< (EASY IRON)
900 revolutions per minute
–
à (DELICATES)
700 revolutions per minute
–
s (WOOLLENS)/P (Hand Wash)
900 revolutions per minute