Kodak Z1085 IS - Manual (Page 35)

Doing more with your camera
www.kodak.com/go/support 29
Using the Capture + menu
AF Control
Choose an auto-focus setting.
Available only in SCN, P/M, and
Video modes. Continuous AF—because the camera is always focusing,
there is no need to press the Shutter button halfway down to
focus.
Single AF—uses TTL-AF (through-the-lens auto focus) when
the Shutter button is pressed halfway down.
Press Menu, , ,
and OK to access settings
Capture + Options
White Balance
Choose your lighting condition.
Available only in P/M and
Panorama modes. Auto—automatically corrects white balance. Ideal for
general picture taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of household light
bulbs. Ideal for indoor pictures under tungsten or halogen
lighting without flash.
Fluorescent—corrects the green cast of fluorescent
lighting. Ideal for indoor pictures under fluorescent lighting
without flash.
Open Shade—for pictures in shade in natural lighting.
Exposure Metering
Evaluate light levels at specific
areas of a scene.
Available only in P/M and
Panorama modes. Multi-pattern—evaluates lighting conditions throughout
the image to give an optimum picture exposure. Ideal for
general picture taking.
Center-weighted—evaluates the lighting conditions of
the subject centered in the LCD. Ideal for backlit subjects.
Spot—similar to Center-weighted, except the metering is
concentrated on a smaller area of the subject centered in the
LCD.
Press Menu, , ,
and OK to access settings
Capture Options