Changing p, a, s, or m mode settings – Kodak Z950 User Manual
Page 18

Doing more with your camera
18
www.kodak.com/go/easysharecenter
Changing P, A, S, or M mode settings
1 Turn the Mode dial to P, A, S, or M.
2 Press
to access a setting. Press
to change the setting.
Aperture—(also known as f-stop) control the size of the lens opening, which
determines the depth of field.
■
Smaller f-stop numbers indicate a larger lens opening; good for low-light.
■
Larger f-stop numbers indicate a smaller lens opening; keeps the main subject
sharp; good for landscapes and well-lit conditions.
Shutter Speed—control how long the shutter stays open. (To prevent blur, use a
tripod for slow shutter speeds.)
Exposure Compensation—adjust the exposure. If the picture is too light, decrease
the setting; if it’s too dark, increase the setting.
Flash Compensation—adjust flash brightness.
Focus Mode—choose Auto, Close-up, Landscape, or Manual Focus.
ISO—adjust the camera’s sensitivity to light. Higher ISO indicates greater sensitivity.
Aperture
Shutter
speed
Exposure
compensation
ISO
Flash
compensation
Note: A yellow setting
indicates possible
unsatisfactory results.
(However, you can still
take the picture.)
Focus
Mode
urg_01009.book Page 18 Tuesday, April 28, 2009 2:59 PM