Kodak V1073 - Manual (Page 14)

Doing more with your camera
14 www.kodak.com/go/easysharecenter
Using the flash
1 In any Still mode, open the Settings panel.
2 Tap Flash repeatedly, until the desired setting (see
table, below) appears at the bottom of the LCD.
3 Compose the scene. Press the Shutter button
halfway, then completely down.
Open
the
Settings
panel
Tap the Flash setting
Flash modes Flash fires
Auto When the lighting conditions require it.
Fill
Every time you take a picture. Use when the subject is in shadow or is “backlit.”
In low light, hold the camera steady or use a tripod.
NOTE: Fill flash is not available in Smart Capture mode.
Red
Eye
In Red Eye flash:
■ If Red Eye Preflash is on (in the Setup menu), the flash fires twice, shrinking
the eye pupil and reducing the chance of red eye.
■ If Red Eye Preflash is off , the flash fires once and the camera firmware helps
remove red eye .
Off Never
urg_00839.book Page 14 Tuesday, January 15, 2008 7:52 AM