Direct printing with a pictbridge-enabled printer, Preparing the camera and printer, Connect the camera to the printer – Kodak CX7530 User Manual
Page 46: Printing pictures
Transferring and printing pictures
40
www.kodak.com/go/support
Direct printing with a PictBridge-enabled
printer
Your camera features PictBridge technology, so you can print directly to
PictBridge-enabled printers.
Preparing the camera and printer
To get started, you need:
IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare
camera dock or printer dock to power your camera.
Connect the camera to the printer
1 Turn off the camera and printer.
2 Optional: If you have a Kodak 3-volt AC adapter (optional accessory), plug
it into the camera and into an electrical outlet.
3 Using the USB cable that came with your camera, connect the camera to
the printer. (See your printer user guide for details.)
Printing pictures
1 Turn on the printer. Turn the camera Mode dial to Auto.
The PictBridge logo and current picture are displayed. (If you turned the Mode
dial to Favorites, the current favorite picture is displayed.) If the menu interface
turns off, press any button to redisplay it.
2 Press
to choose a printing option, then press the OK button.
■
Camera with fully-charged batteries, or
with optional Kodak 3-volt AC adapter
■
PictBridge-enabled printer
■
USB cable included with your camera
Current Picture
Print the current picture. Press
to choose a different
picture. Choose the number of pictures to print.
Tagged Pictures If your printer is capable, print pictures that you tagged for
printing (see
) and choose a print size.
Index Print
Print thumbnails of all pictures. This requires one or more sheets
of paper. If the printer is capable, choose a print size.
All Pictures
Print all pictures in internal memory, on a card, or in Favorites.
Choose the number of pictures to print.
Image Storage
Access internal memory, a card, or Favorites.