Kodak KB28 - Manual (Page 9)

6
2. Insert the flat end of the film
cartridge over the FILM
SPINDLE (15). Push the other end of
the film cartridge down into the
FILM CHAMBER (12) until it fits
securely into place.
3. Pull out the film leader until the
tip reaches the FILM - LOAD MARK (17).
4. Lay the film flat between the film-
guide rails rotating the film
cartridge in the direction of the
FILM - SPROCKET TEETH (11).
• Do not force it into the
film chamber.
Film-Load
Mark
Film-Guide Rails
Film Leader