Vollrath Professional Series 2600 Watt Sizzle Platter Induction Heaters - Manual (Page 3)

3
ENGLISH
O
peratOr
’
s
M
anual
t
roubleShooting
Problem It might be caused by Course of Action
The unit turned off after
10 minutes.
There is not a pot/pan on the induction skillet heater or the pot/pan is
not induction-ready cookware. The induction range turned off. This is
normal.
Make sure the pot/pan is induction ready. See the
FUNCTION and PURPOSE Section of this manual.
The unit is on, but not
heating.
The cookware may be too small or may not be induction-ready.
Make sure the pot/pan is induction ready. See the
FUNCTION and PURPOSE of this manual.
The digital display lights
are flashing.
The overheat-protection feature may have activated. Remove cookware. Let cooking surface cool.
The unit suddenly stopped
working.
The unit may be too close to an external heat source or the air intake
may be restricted.
Relocate the unit away from any external heat
source. Clear any obstructions to the air intake.
Flashing Message
(F code)
It might be caused by Course of Action
F-9 (Bad Pan - F9) The cookware may be too small or may not be induction-ready.
Make sure the pot/pan is induction ready. See the
FUNCTION and PURPOSE of this manual.
F-2 (Too Hot - F2)
The overheat-protection feature may have activated.
Remove cookware. Let cooking surface cool. Clear
any obstructions to the air intake.
F-8 (Bad Flow - F8)
The unit may be too close to an external heat source or the air intake
may be restricted.
Relocate the unit away from any external heat
source. Clear any obstructions to the air intake.
F-4 (Heatsink - F4)
The overheat-protection feature may have activated.
Remove cookware. Let cooking surface cool. Clear
any obstructions to the air intake.
F-5 (Heat Therm - F5)
The overheat-protection feature may have activated.
Remove cookware. Let cooking surface cool. Clear
any obstructions to the air intake.