Vogels PFF 7810 - Manual (Page 3)

Display mounting hardware
Display
Center Marker
Start by installing the lower center monitor
first to the video wall frame and loosely
secure as shown.
Preparing brackets
for installation
Securing brackets
when installed
Install the left and right adjustable mounting
brackets to the displays aligning the "V" notch
on the display mounting plate to the rear center
height of the display. See arrow to center notch.
Note: lower round security rings on the mounting
bracket need to face to the center of the display.
See arrow.
Once center of display alignment is confirmed,
securely tighten all mounting bracket to display
mounting screws with correct pitch hardware
supplied.
Insure the three "V" alignment notches on each
mounting bracket are at their factory preset
center with all notches together to indicate you
are in the center of your alignment adjustment
field. If not in center alignment, adjust the top
Allen head screw(s) to adjust the center to the
correct starting position on each mounting
bracket.
See arrow.
Step 4
Step 5
3 www.vogels.com