Vogels PFT 8857 - Manual (Page 6)

www.vogels.com 9531-060-Z05-00
1
3
2
4 17 16
15 14
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFT8857
Remove the M6 security holding screw from the receiver and
set to the side for re-install after the crossbar and display
are installed into the received slots.
Re-install the M6 security screw.
Depending on the size and weight of the display use ap-
propriate number or personal and lift assistance device to
raise and slowly install the round center of the cross bar into
the round receiver chassis and insure it is fully seated in the
receiver chassis.
Friction of the rotation can be adjusted by increasing or
decreasing the friction screw on either side of the receiver
assembly penetration of the two installed friction screw with
a Phillips head screwdriver.