Vogels PFT 8810 - Manual (Page 3)

www.vogels.com 9532-010-Z01-00
1
3
2
4
4 3
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFT8810
6 5
4mm
4mm
4x
13mm
3
5 6
Repeat the same procedure with the upper rear panel to the
leg assembly with the four each M6 x 10mm “button head”
Allen screws supplied.
Now secure firmly the four lower pan “button head” screws
to the leg assembly and tighten firmly. Repeat the same pro-
cess with the front and rear upper cover panels but “don’t”
over-tighten these.
The rear oval panel cover can be installed before or after
final assembly of the cart with the four each M6 x 10mm
“button head” Allen head screws supplied.
Laying the paired leg assembly first on its back and then on
its front securely install the four casters on the front and rear
of the leg assemblies using the M8 flat washers and M8 self
locking nuts supplied. Then securely install the four casters.
We recommend the two rear caster be the “locking pair”
Install the front “logo” plate to the bottom panel cover with
the four each 10/32 x 1/2” “kep” nuts and flat washers sup-
plied.
16x 16x
13mm