TRITTON AX Visor Bluetooth Hands-Free Car KitSpeaker Phone - Manual

13 12 11 10 9 8
Tritton Technologies warrants this product against all defects in material and workmanship
for a period of one year from the date of purchase by end user. The conditions for warranty
are as follows .
The warranty is valid only if the original receipt issued to the original purchaser by the dealer
is presented with the product to be repaired or replaced.
The warranty is void if the serial number, date of purchase and/or product label has
been removed.
The warranty does not cover any failure or damage of the product due to normal wear and
tear, physical abuse, improper installation, misuse, modification or repairs by unauthorized
third parties.
Tritton Technologies does not assume responsibility for any loss or damage incurred during
shipment and as a result of force majeure.
Tritton Technologies is not liable for any incidental or consequential damages arising from the
use or misuse of the product.
All warranty claims are limited to repair or replacement of the defective product at the sole
discretion of Tritton Technologies.
If Tritton Technologies repairs or replaces the product, the repaired or replaced product shall be
warranted for the remaining time of the original warranty period. Repair or replacement may
involve the use of functionally equivalent reconditioned units. Replaced part or product
becomes the property of Tritton Technologies.
Consumable components, such as batteries, are not included in the warranty obligation.
Product Warranty
-
-
-
-
-
-
-
-
-
Standards
RF Frequency Range
Profiles Supported
Transmission Power
Distance
Audio Output
Battery Life
Charging Time
Charging Voltage
Adapter Input
Buttons
Display
Weight
Operating Temp. & Humidity
Certification
Bluetooth Specification V1.2
2402 ~ 2480 MHz
Headset, Handsfree
0.25 ~ 2.5mW (Class 2)
10m (in open space)
> 1W
Standby > 400 hrs
Continuous Talk Time > 15 hrs
< 3 hrs
DC +5V (USB)
AC 90~250V
Power On/Off,Multi-Function Button,
Mute Button,Volume Up/Down
128 X 32 dots OLED (white)
63g
-10 ~ +50°C,Rel.Humidity 0 ~ 95%
BQB, FCC, CE, MIC
Product Specifications
For privacy reasons, if you don’t want the
party on the other line to hear your voice,
you can mute the microphone by long
clicking MUTE/HOLD button. To cancel
mute function, long click MUTE/HOLD
button.
To transfer calls from AX Visor to phone and
vice versa, long click Mute / Handset during
mode.
During talk mode, if you receive another
call, lshort click MFB button to hold the 1st
call and answer 2nd call. To toggle between
calls, short click MFB button. During talk
mode, by short-clicking MFB, you can end
the current call to continue with the next call.
Note: 3 Way Call function is only applicable
if user has subscribed for such service.
Function
Microphone
Mute
Call Transfer
Answer 2nd line
/ 3 Way Call Call Waited
Call Transferred
Mic. Muted
Display Action / Tone Indicator
Volume Control
Short click (+) or (-) to adjust volume. To
adjust volume in continuous increments,
click and hold (+) or (-) button.
Pairing the AX Visor with other Bluetooth Devices
Function Display Action / Tone Indicator
To put AX Visor in pairing mode, while
pressing MFB, slide Power Switch from x
to o. Keep pressing the MFB until you see
‘Wait for Pairing’, AX Visor and Bluetooth
Device Address. AX Visor is now ready to
be paired. Pairing mode lasts for 3
minutes, after this period AX Visor returns
to standby mode.
From a Bluetooth phone or PC, search for
AX Visor. When prompted for pinkey, enter
‘0000’ which is the pinkey for AX Visor.
When paired, you will see ‘Pairing
Success’ followed by display of
‘Connection States’ and ‘Battery Level
Indicator.
If AX Visor was paired in upside down
position(Car Handsfree mode), car icon
will be displayed and likewise, if it was
paired in upright position(Speakerphone
mode), then the sound icon will be
displayed.
In idle mode, short click MFB to check the
connection status. If Bluetooth icon is
highlighted, it means AX Visor is in
connection state.
Under the following circumstance, AX
Visor automatically attempts to reconnect
to the last connected device.
- When car engine is started (when engine
vibration has been detected)
- If AX Visor is disconnected, long click
MFB until you hear the beep tone followed
by display of Connecting...’image. AX
Visor will then reconnect to the last device
used.
To prevent accidental button activation
while the device is being carried around,
lock the button operations by long clicking
MUTE/HOLD button. To unlock, long click
MUTE/HOLD button.
Pairing Mode
Pairing Successful
&
Connection State
Connection State
Reconnect
Function
Button Hold
Function
Wait for Pairing
00150E001A05
Tritton TRI-BC200
Pairing Success
Connecting...
Bluetooth ® Hands-Free Car Kit
Speaker Phone with Caller ID
TRI-BC200
Rev 1.0
Echo and Noise Cancellation
- Integrated DSP(Digital Signal Processor) eliminates echo and noise thereby
providing clear voice quality even under harsh environmental conditions.
- If AX Visor is used as ‘Car Handsfree’ mode in car, it eliminates most
surrounding noise (engine noise, wind noise, surrounding noise, radio sound
etc.) and delivers clear voice to the other party. Also, it eliminates echo signals
created by transmission of car speaker sounds to the microphone. The above
mechanism for echo and noise cancellation is realized through the use of 2
microphone system and algorithm which cancels out unnecessary noise,
while delivering only the user’s voice. Due to this, for best in-car
performance, mount the AX Visor (upside down) on the sun visor.
8004311176
- Alternately, if AX Visor is used as ‘Speakerphone’ mode (right-side up), it
doesn’t matter in which direction the AX Visor is placed as noise signals
generated from all directions will be processed thereby making it suitable for
conference calls.
8004311176
- The transition from one mode to another and vice-versa takes place
automatically. That is, if AX Visor is placed upright, ‘Speakerphone’ mode
will be activated and likewise, if it is placed upside down, ‘Car Handsfree’
mode will be activated. However, this automatic mode transition doesn’t take
effect during talk mode.
Attaching the AX Visor onto a Sun Visor
- Mount the clip onto the back of AX Visor and slide the clip onto sun visor as
shown below
8004311176
Disclaimer Notice
The manufacturer shall not be liable for errors contained herein or for incidental or consequential damages in connection with the
furnishing, performance or use of this material. This document contains proprietary information, which is protected by
international patent applications and copyright. All rights reserved. No part of this document may be copied, reproduced or
translated without prior written consent of the manufacturer. The manufacturer reserves the right to revise this publication and to
make changes from time to time in the contents hereof without obligation to notify any person of such revisions or changes. The
manufacturer also reserves the right to change the specifications without notice.
European CE notice to users and product statements
This product is C E marked according to the provisions of the R & TTE Directive (99/5/EC). Hereby, Tritton Technologies Co., Ltd,
declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
For further information, please contact http://www.trittonusa.com
FCC notice to users and product statements
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions; (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
WEEE Directive 2002/96/EC Art. 11(2)
The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about
recycling of this product, please contact your local city office, your household waste disposal service or the shop where
you purchased the product.
7 6 5 4 3 2 1
Charging the AX Visor Battery OLED Display Features Package Contents Introduction CONTENTS
- If battery level is low, battery level indicator icon will be
displayed as empty.
- To charge the battery, connect the handsfree kit to AC/DC
power adapter or PC using the USB Cable.
- During charging, the battery level indicator will flash with the
text ‘Charging’ displayed in static motion.
Charging….
- When charged, the text ‘Charged’ will flash on the OLED screen.
Charged
Switching the AX Visor ON/OFF
- To switch on AX Visor, slide the power switch to O. You will
hear a boot tone, it will display the TRITTON logo followed by
connection state icons and battery level indication. For battery
power saving, display enters sleep mode after 10 seconds.
- To switch off AX Visor, slide the power switch to X.
Except during talk mode, battery power consumption is very
low and therefore, it is not necessary to switch off power.
By keeping the AX Visor switch on, you can enjoy the special
feature of ‘Automatic Connection’ to the phone when car
engine is started.
Hold Indicator
Bluetooth
Connection
Status
Mode Indicator
Battery Indicator
Buttons locked
Buttons unlocked
Bluetooth Disconnected
Bluetooth Connected
Automatic Mode Switching & Invertible Display Function
The AX Visor is equipped with Automatic Mode Switching as well as Automatic
Invertible OLED functions.
Automatic Mode Switching sets the best talk environment for the user depending
on where the AX Visor is used. If the AX Visor is clipped onto a sun visor, it
automatically enters into Car Handsfree Mode, Uni directional Microphone, and
when placed on a table, it enters into Speakerphone mode (patent pending) with
Omni directional Microphone.
The OLED display will automatically invert to an upright viewing direction
depending on whether the AX Visor is placed upright or upside down.
8004311176
8004311176
0313810295
0313810295
To conserve battery life, the
display automatically switches
off after 10 seconds. To see the
display again, short click MFB.
Car Handsfree Mode :
Optimum voice quality
when mounted onto
sun visor.
Speakerphone Mode :
Optimum voice quality
when placed on table
8004311176
8004311176
- Bluetooth Handsfree Kit (AX Visor)
- Sun Visor Clip
- AC/DC Charger Adapter
- USB Cable
- User Manual
Volume Control
Mute / Handset Button
Display
Speaker
Microphone
USB Port
Power Switch
MFB
8004311176
8004311176
High Quality Wireless Handsfree Function Dual (Car and Indoor) Application –
Automatic Mode Switching
Enhanced Echo & Noise
Cancellation via DSP Automatic Invertible Display Function
Detection Function Automatic
Bluetooth Connection
Charging and Firmware
Upgrade via USB
Thank you for purchasing the Tritton AX Visor Bluetooth handsfree kit. The AX Visor
incorporates state-of-the-art wireless handsfree and speakerphone technology.
It functions as a ‘Car Handsfree Kit’ or ‘Portable Speakerphone’ when linked to
Bluetooth phones supporting headset or handsfree profiles.
Uniquely designed to be portable and versatile, the AX Visor will provide you with
maximum comfort and satisfaction for all of your handsfree needs whether you use
the device in a car, outdoor or in an office.
Introduction...................................................................................................
Safety Instructions.......................................................................................
Product Features.........................................................................................
Package Contents.......................................................................................
Description of Parts.....................................................................................
OLED Display Features..............................................................................
Charging the AX Visor Battery ....................................................................
Switching the AX Visor ON/OFF.................................................................
Basic Handsfree Operations for the AX Visor...........................................
Pairing the AX Visor with other Bluetooth Devices...................................
Echo and Noise Cancellation......................................................
Attaching the AX Visor onto a Sun Visor.....................................................
Product Specifications................................................................
Product Warranty.................................................................................
Safety Instructions
- Check the laws and regulations on the use of mobile phones and handsfree
equipments in areas you intend to use the AX Visor.
- As much as possible, do not manipulate the buttons of the device while driving.
- Do not expose the device to direct sunlight especially on the dashboard of a car in
extreme temperatures as it may cause product deformation and even battery
explosion. For safety, store the device in glove or console box when not in use.
- When cleaning the device, do not use any type of abrasive pad, scouring powder or
solvents as these may render the finish dull permanently.
- When charging the device using AC/DC adapter, please make sure the correct
input voltage is used.
- Charge the battery for at least 2 hours before using.
- Do not use in places like hospitals, airplanes etc. where use of electronic devices is
prohibited.
- Do not expose the device to extremes of temperature, moisture and vibrations.
2
2
3
4
4
6
6
7
9
10
11
12
13
5
Description of Parts
Online Support: www.TRITTONUSA.com
Phone Support: 800-431-1176
Email Support: [email protected]
Product Features Basic Handsfree Operations for the AX Visor
Function
On an incoming call, ‘Ringing’ and ‘Caller ID’
will be displayed alternately. If Caller ID
function is not supported by the phone, then
only ‘Ringing…’ will be displayed. To answer
call, short click MFB.(For acronym
references, please see page 4)
To make a call, first dial from the phone and
short click MFB to switch call to AX Visor
Note : Some phones allow direct call transfer
without having to press MFB.
To redial, short click MFB. For some phones,
when MFB is short clicked, it first displays the
numbers last called or received. In this case,
short click MFB again to redial. Note : Some
phones allow direct redial by short clicking
MFB just once.
To voice dial, make sure your phone supports
voice dialing function and that it is activated
and voice tags have been recorded. In idle
mode, short click MFB to first display the
icons and then long click MFB to initiate voice
dial.
To end call first, short click MFB during ‘Talk
Mode’. If other party ends the call first, AX
Visor automatically returns to handsfree
standby mode. After call is ended, talk time
will also be displayed.
To reject incoming call, long click MFB.
Display Action / Tone Indicator
Ringing...
0313810295
07:25
Call Transferred
Redialing...
Voice Dialing
Call Ended
Call Rejected
Answer Call
Make Call
Redial
Voice Dial
End Call
Reject Call
Many of the buttons perform multiple tasks, based upon if they are tapped, or held
down. We call this “Short Click” and “Long Click” respectively throughout the manual.