TRITTON Pro+ 5.1 Surround Headset - Manual (Page 15)

[15]
Connect to PS3
Remove protective caps from the optical cable .
Plug one end of the optical cable into the rear of the gaming console . Plug
the other end of the optical cable into the Decoder Box .
Plug one end of the USB Cable to a USB port on the console . Plug the other
end of the USB Cable into the Decoder Box .
Connect Power Adapter to Decoder Box . Plug Power Adapter into wall outlet .
Plug the headset into the Decoder Box .
Power ON the gaming console and the Decoder Box .
On the PS3 go to Settings > Sound Settings > Audio Output Settings and
change the audio output to be “Optical Digital .”
8 On the PS3 go to Settings > Accessory Settings > Audio Device Settings,
and set both the input and output to “TRITTON PRO+ Headset .” You can see
a visual confirmation that the microphone is functioning if the bar graph
moves .
If you are using a DTS-compatible game or movie, and the “Dolby Digital”
light on the decoder box does not illuminate, you must disable DTS 5.1 audio
on your PlayStation 3. To do so, navigate to Settings > Sound Settings >
Audio Output Settings > Optical Digital in the XrossMediaBar™ and ensure
that “Dolby Digital 5.1 Ch.” is checked, and “DTS 5.1 Ch.” is unchecked.