Handset display screen messages – AT&T DECT 6.0 EL52100 User Manual
Page 58
![background image](/manuals/46813/58/background.png)
53
Appendix
CALL LOG EMPTY
You are accessing an empty caller ID history.
DIRECTORY EMPTY
There are no directory entries.
DIRECTORY FULL
The directory is full. You cannot save any new entries unless
you delete some current entries.
ENDED
You have just ended a call.
INCOMING CALL
There is a call coming in.
LINE IN USE
An extension telephone on the same line or the handset is
in use.
LOW BATTERY
The battery needs to be charged.
MICROPHONE ON
Mute is off so the other party can hear your voice.
MUTED
The microphone is off.
NEW VOICEMAIL
There are new voicemail messages from your telephone
service provider.
NO BATTERY
You have placed the handset in the telephone base without
installing a battery in that handset.
NO LINE
There is no telephone line connected.
NO MESSAGE
There are no messages in the answering system.
NOT AVAILABLE
AT THIS TIME
Someone else is already using the answering system on the
telephone base.
NUMBER
ALREADY SAVED
The telephone number you have entered is already stored in
the directory.
OUT OF RANGE OR
NO PWR AT BASE
The handset has lost communication with the telephone base.
PAGING
The telephone base is paging the handset.
PHONE
The handset is on a call.
PLACE IN
CHARGER
The battery is very low. The handset should be placed in the
telephone base.
REC MEM FULL
The answering system memory is full.
RINGER MUTED
The ringer is muted temporarily during an incoming call.
SAVED
The entry is now in the directory.
SPEAKER
The handset speakerphone is in use.
UNABLE TO CALL.
TRY AGAIN
While the handset is on a call, it is out of range or there is
no power at the telephone base.
Handset display screen messages