Hapter, Ppendix, A.1 specification – Airlink101 AICN1777W User Manual
Page 75
- 74 -
C
HAPTER
6
A
PPENDIX
A.1 Specification
Image Sensor
•
Sensor Type: 1/4” Color CMOS
•
Sensor Resolution: 640 x 480 pixel
•
Minimum Illumination: 0.5 Lux
Lens
•
Lens Type: Board Lens
•
View Angle (Diagonal): 64 degree
Video
•
Image Compression: MPEG4/MJPEG
•
Exposure, White Balance, Gain Control:
Automatic
•
Image Resolution and Frame Rate:
- VGA (640 x 480): 30fps
- QVGA (320 x 240): 30fps
- QQVGA (160 x 120): 30fps
Audio
•
Input: Built-in Microphone
•
Output: External Connector for Mono
Speaker
•
Codec: PCM / AMR
Communication
•
IEEE802.3u 10/100Mbps Fast Ethernet
•
Wireless: IEEE802.11b/g/n
•
Supported Protocols: TCP/IP, UDP,
ICMP,DHCP,NTP,DNS,DDNS,SMTP,FTP
,HTTP, Samba, PPPoE, UPnP, Bonjour,
RTP,RTSP,RTCP
LED
•
Power (Orange)
•
Link/Act (Green)
Interface & Buttons
•
DC Power Connector
•
Ethernet Cable Connector
•
GPIO Connector (1 In & 1 Out)
•
USB port with dismount button
•
Audio-out port
•
External Antenna Connector
•
Reset Button
Power Adapter
•
Input: AC 100-240V, 50-60Hz
•
Output: DC 12V / 1.5A
•
Power Consumption: 10 watts Max.
System Requirements
•
To run setup utility and install UltraView:
Windows XP/Vista/7
•
To view/manage camera from web browser:
Internet Explorer 6.0 or above
Safari and Mozilla Firefox or above(with Java
plug-in for MJPEG and Quick Time plug-in
for MPEG4)
Operating Environment
•
Temperature : 0°C ~ 45°C
•
Humidity : 20% ~ 85% non-condensing
Storage Environment
•
Temperature : -15°C ~ 60°C
•
Humidity : 0% ~ 90% non-condensing
Safety Approval
•
FCC and CE
Warranty
•
1-Year Limited Warranty