American Dryer Corp. MDG75V - Manual (Page 10)

6
SECTION II
SPECIFICATIONS
A. SPECIFICATIONS
* ALL MDG75V reversing dryers are supplied with two (2) 3-phase (3ø) motors standard: a 1/2 HP (0.37 kw)
blower motor and a 1/2 HP (0.37 kw) drive motor.
** Size of piping to dryer varies with installation conditions. Contact factory for assistance.
NOTE: Manufacturer reserves the right to make changes in specifications at any time without notice
or obligation.
Gas
MAXIMUM CAPACITY (DRY WEIGHT) 75 lbs 34 kg
BASKET (TUMBLER) DIAMETER 37” 94 cm
BASKET (TUMBLER) DEPTH 36” 91.5 cm
BASKET (TUMBLER) MOTOR 1 HP* 0.745 kw
DOOR OPENING (DIAMETER) 21-1/2” 54.61 cm
BASKET (TUMBLER) VOLUME 22.4 cu. ft. 0.634 cu.m.
EXHAUST CONNECTION (DIAMETER) 8” 20.3 cm
AIRFLOW 1000 cfm 28.3 cmm
DRYERS PER 20'/40' CONTAINER 10/20
DRYERS PER 48'/53' TRUCK 24/26
VOLTAGE AVAILABLE 120-460v 1ш-3ш 3, 4w 50/60 Hz
APPROX. WEIGHT (UNCRATED) 721 lbs 327 kg
APPROX. WEIGHT (CRATED) 771 lbs 349.7 kg
HEAT INPUT 175,000 btuh 44,100 kcal/hr
INLET PIPE CONNECTION 3/4” F.P.T.**
Shaded areas are stated in metric equivalents