En g li s h – Nostalgia Electrics CCM600 User Manual

Page 11

Place the new Extractor Head with wires attached onto the shaft and replace center bolt.

Tighten the center bolt using the #1 Wrench (K).

CHANGING THE KRYPTOL

The Kryptol is the connection point that powers the heating element on the extractor

head. The electricity from the machine transmits heat through the Kryptol which allows

the Extractor Head to get hot and melt the sugar. Eventually the Kryptol wears down

with continued use of the OLD FASHIONED COMMERCIAL COTTON CANDY MAKER,

and needs to be replaced. Follow the directions below when changing the Kryptol:

Before replacing the Kryptol, make sure that the machine is turned OFF,

unplugged, and the Extractor Head has cooled completely.

Use the Screwdriver to remove all screws from the collar and remove collar.