Nostalgia Electrics CCP510 - Manual (Page 10)

E
N
G
LI
S
H
8
Assembly of Wheels
1. Slide one #5 Locking Washer onto Axle Bolt (F) and insert Axle Bolt (F) into Wheel (G).
2. Put on one #6 Flat Washer. Insert Axle Bolt (F) with Wheel (G) into Base Support (I).
3. Add a second #6 Flat Washer and #7 Nut Cap. Use Wrench (H) to tighten the #7 Nut Cap.
4. Repeat steps to attach second Wheel (G) onto the other side of the Base Support (I).
(#7)
Nut
Cap
(#5)
Locking
Washer
(F)
Axle
Bolt
(G)
Wheel
(I)
Base
Support
(#6)
Flat
Washers