Introduction, How to operate, En g li s h – Nostalgia Electrics EWC018BLK User Manual
Page 7
E
N
G
LI
S
H
5
INTRODUCTION
Thank you for purchasing the LIVING BY NOSTALGIA 18-BOTTLE ELECTRIC WINE
COOLER. This sleek, modern appliance keeps your bottles cool and on display, yet
is discreet enough in look and in sound to be a classic addition to any interior.
FEATURES
•
55L of storage for loading up to 18 bottles
•
Slide-out chrome shelves
•
Blue interior lighting, with on/off switch
•
Blue LED display with touch keys
•
Double-pane door with stainless steel handle
•
Temperature range of 51° to 64° F (11°C to 18°C)
•
Auto-defrost
•
No compressor, no vibration means low-to-no noise
and bottle-sediment is not disturbed
•
Eco-friendly: no refrigerant needed
•
Adjustable level foot
HOW TO OPERATE
Before first use, clean the unit by removing the shelves and rinsing the cabinet
with soda water, then rinsing with clean water. Use a slightly damp, non-abrasive
sponge, towel or cloth to wipe down the inside and outside of the Main Unit, then
wipe with a non-abrasive towel to dry. Wipe down shelves and put back in place.
1.
After cleaning, find a flat surface near an electrical outlet. Make sure your cord is away from
any water source. It is acceptable to use an extension cord if needed, but use with caution.
2.
Plug unit in, then find the arrow buttons on the cabinet door. The
temperature is pre-adjusted in the range of 51° to 64° F (11°C to 18°C) in
the cabinet. To change this preset, use the up and down arrows. To change
from Fahrenheit to Celsius, press both arrows at the same time.
3.
Once the unit is plugged in, the cooling system will begin to work. When the interior
temperature reaches the preset point, the cooling system will go into half-power mode to
keep the temperature constant.