En g lis h – Nostalgia Electrics SCC399 User Manual
Page 14
EN
G
LIS
H
12
Steps to Replace the Blade
1.
Remove the Ice Tray and insert the Disassembly Tool (K) over the three arms of the Spinner.
2.
Once the Disassembly Tool (K) is properly inserted, twist counter-
clockwise (as the arrow shows) and lift the Spinner out.
3.
Carefully press the tabs of the Blade Housing inward and lift up to release.
4.
Twist off the Blade Cap and, using extreme caution, remove the Blade
Cartridge. Insert the replacement Blade Cartridge, and reverse the above
steps to reassemble. USE EXTREME CAUTION. BLADE IS VERY SHARP.
5.
When replacing the Spinner, reverse all steps and make sure
to lock Spinner using the Disassembly Tool.
See also other documents in the category Nostalgia Electrics Kitchen:
- CCP200 (44 pages)
- CKM100 (42 pages)
- LPM-529 (8 pages)
- RKP630SERIES (32 pages)
- CCP-510 BLK (19 pages)
- CCP610 (16 pages)
- CCP610 (40 pages)
- RETRO POPCORN MAKER RHP (32 pages)
- Vintage CCP-200 (12 pages)
- Movietime MHP-310 (19 pages)
- RETRO SERIES RKP630 (32 pages)
- HKP200 (14 pages)
- RISM900 RETRO RED (24 pages)
- ISM800 (26 pages)
- SCM502 (28 pages)
- SCC200 (16 pages)
- RSM702 (24 pages)
- RSM602 (28 pages)
- EWC018BLK (12 pages)
- EWC008BLK (12 pages)
- MDF200 (42 pages)
- APH200 SERIES (32 pages)
- CCP310B (17 pages)
- CCP399 (42 pages)
- CCP399COKE (42 pages)
- CCP400 (42 pages)
- CCP510 (44 pages)
- CCP810 (40 pages)
- CCP900 (16 pages)
- GKP250 (12 pages)
- KPM200 (32 pages)
- KPK400 (2 pages)
- KCPP5 (2 pages)
- HHP100 (14 pages)
- OFP501 (12 pages)
- MHP310 KIT (30 pages)
- KPP24 (2 pages)
- SERIES KPM508 (32 pages)
- KPM200 CART (18 pages)
- RHP310 COKEKIT (31 pages)
- RHP310 COKE (32 pages)
- RHP310 (32 pages)
- PKC200 (42 pages)
- OFP501 COKE (32 pages)