Nostalgia Electrics SCM502 - Manual (Page 7)

E
N
G
LI
S
H
5
PARTS & ASSEMBLY
Your VINTAGE COLLECTION™ SNOW CONE MAKER comes fully assembled.
• Before first use, lift the Top Housing off of the Main Unit and remove the Ice Shaving Canister.
• The Ice Shaving Canister can be removed by taking off the Ice Shaving
Canister Lid and lifting Ice Shaving Canister from Top Housing.
• Wipe clean the inside of the Main Unit and Ice Shaving Canister with a non-abrasive moist
sponge, a non-abrasive towel, or a damp cloth followed by a non-abrasive dry towel.
• After cleaning the inside, reassemble the Ice Shaving Canister
and Main Unit, and put the top back on the Main Unit.
• Use EXTREME caution when cleaning and handling the Ice Shaving Canister, as the
blades are VERY sharp.
• Now you are ready to enjoy cool, refreshing icy snacks from
your VINTAGE COLLECTION™ SNOW CONE MAKER!
PARTS
ASSEMBLY
Main Unit
Door
Ice Shaving Canister
2 Plastic Cones
Locking Cap
Cone Shelf
Ice Scoop
Ice Shaving
Canister Lid
Top Housing
Ice Feed Insert
Ice Shaving
Canister Lid
Locking Cap
Ice Feed Insert
Ice Shaving Canister
When assembling Ice Shaving
Canister parts, turn Locking
Cap clockwise to lock and turn
counter-clockwise to unlock.