MSI S20 SLIDER 2 - Manual (Page 21)

3-3
™ Power Management
AC Power
It is strongly recommended to connect the AC/DC adapter to the slidebook and use the AC
power while using this slidebook for the first time. When the AC power is connected,
recharging the battery will start immediately.
Note that the AC/DC adapter included in the package is approved for your slidebook; using
other adapter model may damage either the slidebook or other devices attached to it.
Do not cover the AC/DC adapter since it may generate a certain heat while in use. Always be
aware of heat coming from the AC/DC adapter in use.
Battery Power
This slidebook is equipped with a built-in high-capacity Li-ion battery pack. The rechargeable
Li-ion battery pack is an internal power source of the slidebook.
Be aware that this battery pack may be damaged if users try to disassemble the battery pack on
their own. Also, please note that the limited warranty of the battery pack will be voided if the
battery pack is disassembled by non-authorized technicians.
Please follow your local laws and regulations to recycle the slidebook and the built-in battery
pack.
Conserving Battery Power
Efficient battery power is critical to maintain a normal operation. If the battery power is not
managed well, the saved data and customized settings may be lost.
To optimize battery life and avoid a sudden power loss, read the tips below:
Š Suspend system operation if the system will be idle for a while or shorten the suspend
timer’s time period.
Š Turn off the system if you won’t be using it for a period of time.
Š Disable unnecessary settings or remove idle peripherals.
Š Connect an AC/DC adapter to the system whenever possible.