MSI 970A-G45 - Manual (Page 50)

3-14
BIOS Setup MS-7693
Chapter 3
BIOS Setup MS-7693
Chapter 3
tRC
The row cycle tme determnes the mnmum number of clock cycles a memory row
takes to complete a full cycle, from row actvaton up to the prechargng of the actve
row.
tWR
Mnmum tme nterval between end of wrte data burst and the start of a precharge
command. Allows sense amplfiers to restore data to cells.
tRRD
Specfies the actve-to-actve delay of dfferent banks.
tWTR
Mnmum tme nterval between the end of wrte data burst and the start of a column-
read command. It allows I/O gatng to overdrve sense amplfiers before read
command starts.
tRFC
Ths settng determnes the tme RFC takes to read from and wrte to a memory
cell.
Advanced Channel 1/ 2 Tmng Configuraton
Press to enter the sub-menu. And you can set the advanced memory tmng
for each channel.
tRWTT/ tWRRD/ tWRWR/ tRDRD
These tems s used to set the memory tmngs for memory channel 1/ 2.
DCT Unganged Mode
Ths feature s used to Integrate two 64-bt DCTs nto a 128-bt nterface.
Bank Interleavng
Bank Interleavng s an mportant parameter for mprovng overclockng capablty of
memory. It allows system to access multple banks smultaneously.
HT Lnk Speed
Ths tem allows you to set the Hyper-Transport Lnk speed. Settng to [Auto], the system
wll detect the HT lnk speed automatcally.
Adjusted HT Lnk Frequency
It shows the adjusted HT Lnk frequency. Read-only.
HT Lnk Control
Press to enter the sub-menu.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶