Advanced Technology International USA M200 - Manual (Page 8)

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: +1-800-815-6908 | Service: +1-847-329-9875 | Fax: +1-847-410-0094
Email: [email protected] | Web: http://www.tekvend.com
M7500 CreditVend Copier / Printer Controller
Product Overview
The M7500 CreditVend Copier / Printer Controller accepts nickels, dimes, quarters,
dollar coins, $1, $2, $5, $10 and $20 bills and proprietary magnetic debit cards to
vend one or more images, depending on the amount of monetary or card value
(credit) not yet spent. The M7500 comes standard with a high capacity premium
changer.
One price is available for all image types.
The M7500 employs SmartCoin technology to ensure that change is always
available for every conceivable vending situation. Value can be added to cards, and
value on cards can be used to make images, but value on cards cannot be converted
to money.
Foreign coin mechanisms and bill validators are available for select countries. Please
contact us for foreign vending applications.
Electromechanical Features
• Two-line backlit user-friendly LCD display
• Two pushbutton switches for programming and readouts
• Red "message" light
• Semi-gloss enamel finish resists marring, scratches
• High security tubular housing lock
• Bypass keyswitch for free copies
• Bent coin return and change request plunger
• Large coin return cup
• Safe 24 VAC external power supply included
• Standard copier specific harness (sprig) included
• Large cash box ($900 capacity)
• Single board, single chip design
• Five tube US-Canadian MDB changer (N, D, Q, $1 Coin, $82 maximum
capacity) standard
• Self diagnostic MDB bill validator ($1, $2, $5, $10 and $20 Bills, $500
capacity)
• Card programmable MDB card reader for making, revaluing and using debit
cards
Software Features
• SmartCoin technology assures that change is always available for every
conceivable vending situation
• SmartCoin technology dynamically controls bill type acceptance based on
maximum credit allowed, and change available
• User-friendly instructions during vending, programming and readouts
• Exact change and error messages indicated by blinking red LED
• Seamless transition to and from exact change mode ensures that controller
"works out of the box"
• Resettable counter allows user to monitor copying by copies per original, or
total copies made per vend cycle
• AccumaVend technology allows user to add monetary value "on the fly" i.e.
while copies are being made
• In card mode, unused credit is always returned to card
• In card mode, copier / printer use privileges are determined by a group
number field stored on the card
• Virginal cards can be initialized for group number and value directly on the
controller
• Card revaluation can be turned off
• Card vend price can be different than cash vend price
• Time delay reset (TDR) ensures full copy imaging on last full copy credit
• Anti-cheating timeout delay monitors for late copy counts after change return
request made