MSI K9N6PGM2-V2(FOR EUP v2.2) - Manual (Page 12)

2
ReaR PaneL
the rear panel provides the following connectors:
HaRdWaRe SetuP
this chapter provides you with the information about hardware setup procedures.
While doing the installation, be careful in holding the components and follow the
installation procedures. For some components, if you install in the wrong orienta-
tion, the components will not work properly. use a grounded wrist strap before
handling computer components. Static electricity may damage the components.
CPu & Cooler installation for aM2/ aM2+/ aM3
When you are installing the CPu, make sure the CPu has a cooler attached on the
top to prevent overheating. Meanwhile, do not forget to apply some thermal paste
on CPu before installing the heat sink/cooler fan for better heat dispersion.
Follow the steps below to install the CPu & cooler correctly. Wrong installation will
cause the damage of your CPu & mainboard.
PS/2 mouse
PS/2 keyboard Serial port VGa port
394
uSB ports
Lan
Line-in
Line-out
MiC
RS-out
CS-out
SS-out
(optional)
(optional)