MSI RD480 Neo2 - Manual (Page 35)

2-17
Hardware Setup
IEEE 1394 Connectors: J1394_1/ J1394_2 (Optional)
The mainboard provides two 1394 pin headers that allows you to connect IEEE
1394 ports via an external IEEE1394 bracket (optional).
Foolproof
design
Connected to J1394_1 or J1394_2
(The Green connector)
IEEE1394 Bracket (Optional)
J1394_1/2
1
2
9
10
Chassis Intrusion Switch Connector: JCI1
This connector is connected to a 2-pin chassis switch. If the chassis is opened, the
switch will be short. The system will record this status and show a warning mes-
sage on the screen. To clear the warning, you must enter the BIOS utility and clear the
record.
Pin Definition
PIN SIGNAL PIN SIGNAL
1 TPA+ 2 TPA-
3 Ground 4 Ground
5 TPB+ 6 TPB-
7 Cable power 8 Cable power
9 Key (no pin) 10 Ground
JCI1
1
CINTRU
2
GND