MSI X79A-GD65 - Manual (Page 41)

1-31
MS-7736
Chapter 1
Voltage Checkponts Connector: FV1
These voltage checkpont are used to measure the current system voltages. A multmeter
(not ncluded) wll be requred to check voltages. To check the voltage, please use
the ncluded voltage checkpont cables ncluded n the manboard package. Attach the
postve lead of the multmeter to the voltage checkpont cable and the negatve lead to
the ground connector.
DDR A/ B
DDR C/ D
GND
1
7
PCH_1P1V
CPU_SA
CPU_IO
CPU_CORE
B AT T +
Pont Descrpton
GND (pn 7) Ground
PCH_1P1V (pn 6) PCH 1.1 voltage. The PCH voltage s the voltage suppled to
the platform Controller Hub.
DDR_C/D (pn 5) Memory channel C and D voltage. The DDR memory voltage
s the voltage suppled to the DDR memory modules on the
manboard. Lower memory tmngs may requre hgher volt-
ages to mantan system stablty.
DDR_A/B (pn 4) Memory channel A and B voltage. Refer to rhe DDR_C/D.
CPU_SA (pn 3) CPU system agent voltage (MC). The CPU SA voltage s the
voltage suppled to the MC (ntegrated Memory Controller)
on the CPU. Hgher overclocks may requre a hgher CPU
SA voltage to mantan stablty.
CPU_IO (pn 2) CPU IO voltage (Uncore). The CPU IO voltage s the voltage
suppled to the Uncore on the CPU. Hgher overclocks may
requre a hgher CPU IO voltage to mantan stablty.
CPU_CORE (pn 1) CPU core voltage. The CPU voltage s the voltage suppoed
to the CPU core. Hgher overclocks may requre hgher CPU
core voltages to mantan stablty.