MSI H81TI - Manual (Page 24)

English
24
JLVDS_POWER: LVDS Power Connector
Use this connector to specify the operation voltage of the LVDS interface flat panel.
5V
(default)
3
5
4
3V
3
5
4
9V
3
5
4
JLVDS_BK: LVDS Backlight Power Connector
This connector is provided for LCD backlight options.
9V
(default)
2V
JBAT: Clear CMOS Jumper
There is CMOS RAM onboard that is external powered from a battery located on the
motherboard to save system configuration data. With the CMOS RAM, the system
can automatically boot into the operating system (OS) every time it is turned on. If
you want to clear the system configuration, set the jumpers to clear the CMOS RAM.
Keep Data Clear Data
Important
You can clear the CMOS RAM by shorting this jumper while the system is off.
Afterwards, open the jumper . Do not clear the CMOS RAM while the system is on
because it will damage the motherboard.