MSI Z87M GAMING - Manual (Page 82)

Chapter 3
3-18 BIOS Setup 3-19 BIOS Setup 3-18 BIOS Setup 3-19 BIOS Setup
Load Memory Presets [Disabled]
Selects the preset memory overclocking parameters, that includes memory voltage
and timing, to optimize the installed memory performance.
Important
Manual tweaking or fine-tuning the memory parameters is preferred due to different
memory module type and quality.
Overclocking is not guaranteed, and if done improperly, can void your warranty or
severely damage the hardware.
DRAM Timing Mode [Auto]
Selects the memory timing mode.
[Auto] DRAM timings will be determined based on SPD (Serial Presence
Detect) of installed memory modules.
[Link] Allows user to configure the DRAM timing manually for all memory
channel.
[UnLink] Allows user to configure the DRAM timing manually for respective
memory channel.
Advanced DRAM Configuration
Press to enter the sub-menu. This sub-menu will be activated after setting
[Link] or [Unlink] in “DRAM Timing Mode”. User can set the memory timing for each
memory channel. The system may become unstable or unbootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data,
and enter the BIOS to load the default settings.)
DRAM Training Configuration
Press to enter the sub-menu. Enables or disables the various training ways of
DRAM. The system may become unstable or unbootable after changing these items
in this sub-menu. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data,
and enter the BIOS to load the default settings.)
Memory Fast Boot [Auto]
Enables or disables the initiation and training for memory every booting.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] Memory will completely imitate the archive of first initiation and first
training. After that, the memory will not be initialed and trained when
booting to accelerate the system booting time.
[Disabled] The memory will be initialed and trained every booting.
DigitALL Power
Press to enter the sub-menu. Controls the digital powers related to CPU
PWM.
▶
•
•
▶
▶
▶
▶
▶