beautypg.com

Chapter 3 – MSI Z97 MPOWER Manual User Manual

Page 87

background image

Chapter 3

3-22

BIOS Setup

3-23

BIOS Setup

Sets the voltage limit for CPU under-voltage protection. If set to "Auto", BIOS will

configure this setting automatically. Higher voltage provides less protection and may

damage the system.

▶CPU Over Current Protection [Auto]

Sets the current limit for CPU over-current protection. If set to "Auto", BIOS will

configure this setting automatically. Higher voltage provides less protection and may

damage the system.

▶CPU Switching Frequency [Auto]

Sets the PWM working speed to stabilize CPU Core voltage and minimize ripple

range. Increasing the PWM working speed will cause higher temperature of

MOSFET. So please make sure a cooling solution is well-prepared for MOSFET

before you increase the value. If set to "Auto", BIOS will configure this setting

automatically.

▶CPU VRM Over Temperature Protection [Enabled]

Enables or disables the CPU VRM over-temperature protection.

[Enabled]

Sets the temperature limit on CPU VRM for over-temperature protec-

tion. The CPU frequency may be throttled when CPU VRM over the

specified temperature.

[Disabled]

Disables this function.

▶DRAM Phase Control [Auto]

Controls PWM phase proportionally to the DRAM loading. If set to "Auto", BIOS will

optimize the DRAM PWM phase automatically.

[Auto]

This setting will be configured automatically by BIOS.

[Disabled]

Disables the PWM power phase switching feature.

▶DRAM Switching Frequency [Auto]

Sets the PWM working speed to stabilize DRAM voltage and minimize ripple range.

If set to "Auto", BIOS will configure this setting automatically.

▶SVID Communication [Auto]*

Enables or disables SVID (Serial Voltage Identification) support.

[Auto]

This setting will be configured automatically by BIOS.

[Enabled]

PWM phase will be changed dynamically according to the CPU SVID

(Serial Voltage Identification).

[Disabled]

Disables SVID (Serial Voltage Identification) support.

▶VCCIN Voltage [Auto]

Sets the CPU input voltage. The CPU input voltage is the CPU power source that is

shared with components of the CPU.

This manual is related to the following products: