Masterbuilt 30-inch Electric Digital Smokehouse (20070312) WOOD CHIP REPLACEMENT - Manual

WOOD CHIP RETROFIT KIT
FOR MASTERBUILT MODELS: 20070312, 20070512
PART NUMBER: 9807120065
WOOD CHIP HOUSING REMOVAL
WOOD CHIP HOUSING INSTALLATION
Masterbuilt Manufacturing, Inc. · 1 Masterbuilt Ct. Columbus, GA 31907 · Customer Service / Servicio de atención al cliente: 1-800-489-1581 · www.masterbuilt.com
100112-04SS MADE IN CHINA
A
Facing front of smoker, remove wood chip tray (A)
and wood chip loader (B) from smoker as illus-
trated.
Remove screws (C) from outside smoker as
shown.
1 2
1
Follow steps in reverse, again inserting retro-fi t wood
chip housing (D) straight in, with the heating element as
shown in FIG A.
Re-insert and tighted screws (C) into new housing (D)
and replace wood chip tray (A).
FIG A.
2
3
Carfully remove wood chip housing (D) by pulling
it straight out toward you.
3
B
D
C
CAUTION
· MAKE SURE THE POWER CORD IS NOT PLUGGED IN AND THAT THE UNIT IS OFF.
· DO NOT PERFORM REPLACEMENT IF HEATING ELEMENT IS HOT.
· SOME PARTS MAY BE SHARP, HANDLE CAREFULLY TO AVOID INJURY