KWorld M100 - Manual (Page 17)

M100
17
THREE
FAQ
Q1: Why can’t I enter the Main Menu, or the Start-up Screen looks different?
Q2: How do I restore to the factory settings on my Media Player M100?
Q4: How do I adjust the time interval for the photo slideshow?
Q5: Why can’t my Media Player M100 detect the USB HDD enclosure?
Q6: Why can’t my Media Player M100 detect my memory cards or USB
memory stick?
Q3: Why is there no sound?
A1: Please follow the steps below:
1. Please check the connections. Have you properly connected all of the necessary
cables? (For example, the power cord for your KWorld Media Player M100.)
2. Is the TV set at “YPbPr input” or “AV input” mode?
A5: Please follow the steps below:
1. Is your USB HDD enclosure working properly when it is connected to other
devices such as your PC?
2. Please check if the USB HDD enclosure is properly linked with M100.
3. Please check the Power LED of your USB HDD enclosure to see if it’s properly
powered-up.
A6:Please check if your memory card or USB memory stick works when it is
connected to other devices such as your PC. If it works with other devices,
please try re-plug it.
A2: Please press the “Menu” key on the remote to enter the Setup page and select
the Factory Default option then press the “OK” key to return to the factory
default settings.
A4: Please press the “ Menu” key on the Remote to enter the Setup page Select the
Slide Interval option and use the ◄/► key to select the interval period that you
prefer. Then, press the “ OK” key to save the setting.
A3: Please check the connection of the audio cables and the audio volume.