KWorld Kanvus Office 53 - Manual (Page 7)

6
Tablet
Refer to the picture below.
Descriptions :
○
1
— USB Connector : Connect to a USB port on your PC.
○
2 — Working Area : Please refer to Working area section for detail descriptions.
○
3
— LED Indicator : The blue LED light on the tablet is the main indicator for hardware
operation. This LED normally blinks, and will only be turned on/off in response to certain conditions.
Pay attention to the states of the LED when you are encountering the following situations :
(a) A built-in power saving function would execute the power saving mode for the pen if it
is left unused for a period of time. Tap anywhere on the surface with the tip of the pen
Working Area
Hotspot Area
USB Connector
LED Indicator