Airlink AWLH3025 - Manual (Page 23)

- 19 -
keys, but only one can be used at a time.
Encryption：Enter the key value in this field.
A key of 10 hexadecimal characters (0-9, A-F) is
required if a 40-bit (a.k.a. 64-bit) Key Size is
selected.
A key of 26 hexadecimal characters (0-9, A-F) is
required if a 128-bit Key Size is selected.
A key of 58 hexadecimal characters (0-9, A-F) is
required if a 256-bit Key Size is selected.
Key size Select from 40-bit (a.k.a. 64-bit), 128-bit or
256-bit.
WPA-PSK Configuration
If your wireless router/access point supports WPA, you can choose to enable
WPA.
1. Select WPA from the Privacy tab, highlight Preshared Key and click Configure.
2. Click on the Passphrase field and enter a passphrase for the WPA key. (Note:
minimum passphrase key must be 8 characters and must match the WPA key on
your wireless router/access point).
3. You can check on the Unmask check box to see the passphrase you’ve entered.
4. Click OK to submit the passphrase.