EasyN F2 Series SD card 1 - Manual (Page 3)

Picture(2-1)
B. Continuous record mode: when enable this mode the record is running when camera is working.
And it can support cycle record mode and alarm on full record mode. As Picture(2-2):
Picture(2-2)
C. Record on need: support offline record(when camera lost network connection alarm and record)
and cycle record control for 24 hours, configure record mode for each hour on need, there are four
modes for such configuration:
Picture(2-3)
1> no record
2> record for specified hour
3> record when motion detected once
4> record on IO event once