AEG KO-LAVAMAT 70730 - Manual (Page 39)

Instructions for use
39
When all the washing solution has drained off:
6. Firmly push the plug into the emergency emptying hose and turn it
tight clockwise.
7. Put the emergency emptying hose back into the holder.
8. Insert the flap into the base panel and close.
Clean the Solution Pump
1 Warning! Before cleaning the solution pump, switch off the washing
machine and pull out the mains plug!
0 1. First carry out an emergency emptying (see the above section ”Carry
Out Emergency Emptying”).
2. Place a wiping cloth on the floor in front of the cover of the solution
pump. Residual water can run out.
3. Unscrew the solution pump cover anti-
clockwise and pull it out.
4. Remove any foregin bodies from the
pump housing.
5. Replace the cover. Insert the webs on
the cover laterally into the guide slots
and screw the cover firmly into place
clockwise.
6. Close the emergency emptying hose and
place it in the holder.
7. Close the flap.