Specifications, The front 92mm fan mounts, The washable air filter – Antec Sonata Solo White User Manual
Page 10
9
Specifications:
Size: 120 x 120 x 25.4 mm
Rated Voltage: DC 12V
Operating Voltage: 10.2V ~ 13.8V
The Front 92mm Fan Mounts
You can install two 92mm fans into the fan cage in front of the internal 3.5”
drives. These fans must be installed so that the air is blowing into the case.
We recommend using Antec 92mm TriCool™ fans to balance quiet performance
with maximum cooling. See our web site for product information.
Note: Please choose your fan speed wisely. In most cases, a medium or low speed
setting will be enough to supply adequate cooling.
The Washable Air Filter
There is a washable air filter attached to the front of the 92mm fan cage. From
time to time it will be necessary to wash the installed air filter. Not washing the air
filter will result in higher system temperatures and possible stability problems.
We recommend checking the air filter at least once a month initially.
The frequency will change depending on system usage (users whose systems run
24/7 will likely have to check/wash more often than those who don’t use their
systems every day) and on environmental conditions.
Speed
Input
Current
Air Flow
Static
Pressure
Acoustical
Noise
Input
Power
High
2000 RPM
0.24A
(Max.)
2.24 m³ / min
(79 CFM)
2.54 mm-H
2
O
(0.10 inch-H
2
O)
30 dBA
2.9 W
Medium
1600 RPM
0.2A
1.59 m³ / min
(56 CFM)
1.53 mm-H
2
O
(0.06 inch-H
2
O)
28 dBA
2.4 W
Low
1200 RPM
0.13A
1.1 m³ / min
(39 CFM)
0.92 mm-H
2
O
(0.04 inch-H
2
O)
25 dBA
1.6 W