Asus NX1101 - Manual (Page 3)

3
Installing the ASUS NX1101
1. Power off your computer and unplug your PC power cord.
2. Open your PC case and find an available PCI slot on the motherboard.
3. Insert the ASUS NX1101 into the PCI slot until all contacts are seated.
4. Secure the ASUS NX1101 bracket to your PC chassis with a screw.
5. Close your PC case.
6. Connect one end of Ethernet RJ-45 cable to the Adapter.
ASUS NX1101 Driver Installation
Windows 95, 98, 98SE, ME, 2000, and XP
After installing the network adapter for the first time, Windows will detect
the new hardware. Browse to the driver on the provided support CD. The
support CD also provides an AutoRun to install drivers automatically.
Window NT4.0 and NetwareX
Login in to NT4.0/NetwareX after installing the network adapter. Insert
the provided support CD and follow the instructions in the “Readme.txt”
to install the drivers.
DOS
Go to DOS after installing the network adapter. Insert the provided support
CD and follow the instructions in the “Readme.txt” to install the drivers.