Atlantis Land NetFly Wireless USB Adapter USB 54 - Manual (Page 12)

USER MANUAL
Wireless USB Adapter 12
5.2 Configuration
This screen is where you set the basic wireless settings for the Wireless
LAN USB 2.0 Adapter.
Profile Name: The default name is the same as the SSID of the platform
which you connected and you can change the name you favor( the key
length is limited 1~32 bits).
SSID: Service Set Identifier, which is a unique name shared among all
client in a wireless network. The SSID must be identical for client in the
wireless network.
Wireless Mode: There are two modes available for selection
• Infrastructure –to establish wireless communication with the LAN
and other wireless client through the use of Access Points.
• Ad-Hoc – to establish point- to-point wireless communication
directly with other wireless client device.
Authentication: The following options are available:
• Open System
• Shared key
• WPA-PSK
• WPA2-PSK
• WPA EAP-TLS
• WPA2 EPA-TLS
Select Open System, Shared Key for WEP data encryption feature.