ARRI MaxMover DayLight - Manual (Page 2)

The ARRI automated stirrup, MaxMover, offers remote pan, tilt
and focus for large daylight and tungsten fixtures. It eliminates
safety and cost concerns of placing an operator in a Condor bucket
as large fixtures can now be mounted on boom arms, tall plat-
forms or in hard-to-reach locations and operated conveniently
from the ground using simple analog control or via wired or wire-
less DMX.
A unique snap-in mounting system allows fixtures up to 176 lb.
(80kg) to be converted quickly and easily from stand to remote
operation. Equipped with a variable width adjustment, the Max-
Mover will accommodate a wide range of fixtures such as 6k or
12kW HMI PARs, 12/18kW HMI Fresnels, T12 and T24 Fresnels.
What fits with the Universal Adapter Plate?
ARRIMAX 18/12
ARRI DAYLIGHT 18/12 PLUS
ARRI COMPACT 12000
ARRI COMPACT 6000
ARRI COMPACT 6000 Theater
ARRISUN 120
ARRISUN 60 (also requires 563720!)
ARRI X 60
ARRI T 24
ARRI T 12
ARRI T 12 Theater
Name MaxMover
Applicable: ARRI daylight fixtures from 6kW to 18kW
ARRI tungsten fixtures from 12kW to 24kW
Adapts to other lampheads due to an
extensionable construction (width is adjustable!)
and a Universal Adapter Plate
Functions: 3 axis motor driven stirrup
PAN&TILT: brushless AC servo motors (24V/30W)
FOCUS (optional): DC servo motor (12V/18W)
Pivoting range in PAN: Infinite, stop point given by a slipping
clutch (0-80Nm)
Pivoting range in TILT: Infinite, stop point given by a slipping
clutch (0-80Nm)
Pivoting range in FOCUS: Infinite, stop point given by a current overload
protection at 5Nm / focus calibration
Min. speed PAN&TILT: 12,6°/min (0,035rpm)
Max. speed PAN&TILT: 360°/min (1rpm)
Speed FOCUS: 16rpm
Weight of stirrup: 33kg/72,75lbs with focus unit
Max. weight load: 80kg/176lb
Lamphead attaches with: Universal Adapter Plate
Operation:
ARRI analog controller for PAN, TILT and FOCUS
(standard); optional DMX-512 interfaces
Protective rating: Max. IP54 / protection class I
Dimensions (wxhxd): Max. 1160x965x300mm / 45,67x38,99x11,81”
DMX 512 support: USITT DMX-512 / DIN56930-2
DMX 512 address setup: Up&Down push buttons
Power specification:
90-265V 50/60Hz, max. 100VA
widthmin=0,54m/21,3“, width max=0,88m/34,6“
widthmin=0,85m/33,5“, width max=1,16m/45,7“
depth=0,3m/11,8“
At a Glance
• Adjustable Width for 6kW – 24kW Lampheads
• Universal Adapter Plate with Quick Snap In
• 80kg / 176lb weight load
• Remote Control incl. (analog)
• DMX Converter Optional
• Wireless Operation (W-DMX)
• Hanging & Standing Operation
• Very Precise Movement Control
• Adjustable Slipping Clutches (0-80Nm)
• 90-265VAC 50/60Hz
• IP54 / Protection Class I