Kramer Electronics VM-2Hxl - Manual (Page 9)

6 VM-2Hxl - Connecting the VM-2Hxl
4 Connecting the VM-2Hxl
Always switch off the power to each device before connecting it to your
VM-2Hxl. After connecting your VM-2Hxl, connect its power and then
switch on the power to each device.
To connect the VM-2Hxl as illustrated in the example in Figure 2 :
1. Connect the HDMI source (for example, a DVD player) to the HDMI
IN connector.
2. Connect the HDMI OUT connectors to up to two HDMI acceptors, as follows:

HDMI OUT 1 connector to an LCD TV

HDMI OUT 2 connector to a plasma display
3. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity.
4. Press the EDID SETUP button to acquire or change the EDID information
(see Section ‎4.1 ).
Figure 2: Connecting the VM-2Hxl 1:2 HDMI Distributor
i