Kramer Electronics VM-2DH - Manual (Page 8)

VM-2DH - Overview 5
3.1 Defining the VM-2DH DisplayPort to DVI/HDMI
Converter
This section defines the VM-2DH.
Figure 1: VM-2DH DisplayPort to DVI/HDMI Converter
# Feature Function
1 EDID SETUP Button Press to cycle through the EDID sources and to
read the EDID (see
Section 4.1
2
)
IN LED Lights green when the input is active; flashes when
the input is not valid
3
OUT DVI LED
Lights green when a DVI acceptor output is
connected
4 OUT HDMI LED Lights green when an HDMI acceptor is connected
5 ON LED Lights green when the unit is powered on
6 DP IN DisplayPort Connector Connect to the DisplayPort digital source
7 DVI OUT Connector Connect to the DVI acceptor
8 HDMI OUT Connector Connect to the HDMI acceptor
9 5V DC Connect to the 5V DC power adapter, center pin
positive