Kramer Electronics VM-8H - Manual (Page 13)

Connecting the VM-8H 1:8 HDMI Distributor
11
the EDID of the connected output.
The EDID of the selected output is stored in the non-volatile memory
when the READ button no longer illuminates.
6.1.2 Acquiring the Default EDID
To acquire the default EDID, do the following:
1. Press the SELECT button.
The OUTPUT LEDs flash simultaneously.
2. Press the READ button.
The flashing ceases and the button illuminates. The VM-8H accesses
the default EDID.
The EDID of the selected output is stored in the non-volatile memory
when the READ button no longer illuminates.
6.1.3 Acquiring the EDID from Several Outputs
To acquire or change the EDID via several connected outputs, do the
following:
1. Press the SELECT button.
The OUTPUT LEDs flash in sequence.
2. Press the READ button.
The flashing ceases and the button illuminates. The VM-8H accesses
the EDID of the connected outputs.
The EDID is stored in the non-volatile memory when the READ
button no longer illuminates.