Kramer Electronics VM-1045 User Manual
Page 11
Configuring the VM-1045 Video Component Distributor
9
7 Configuring the VM-1045 Video Component Distributor
You can configure the
VM-1045
in several different ways, including, as a:
2x1:5 s-Video DA (see section 7.1)
4x1:5 composite video DA (see section 7.2)
The channels can be interconnected via the looping outputs to form larger
configurations, for example a:
1:20 composite video DA (see section 7.3) or a 2x1:10 composite video DA
1:10 s-Video DA (see section 7.4)
7.1 Configuring a 2x1:5 s-Video (Y/C) DA
You can configure the
VM-1045
as a 2x1:5 s-Video (Y/C) DA (see Figure 4):
Y
Y
C
C
s-Video
Source
s-Video
Source
s-Video Display 5
s-Video Display 1
...
s-Video Display 5
s-Video Display 1
...
Figure 4: Configuring as a 2x1:5 s-Video (Y/C) DA
7.2 Configuring a 4x1:5 Composite Video DA
You can configure the
VM-1045
as a 4x1:5 composite video DA. The
illustration in Figure 5 shows how to configure each channel:
Composite Video
Source
Composite Video
Display 5
Composite Video
Display 1
...
Figure 5: Configuring as a 4x1:5 Composite Video DA Configuration