beautypg.com

Diagram one 4. wall brackets – Acoustic Energy Aego-T User Manual

Page 4

background image

Page 2

3. Installation and Positioning

5. Connections and Amplifiers

Diagram Two

An adjustable wall bracket is supplied with each Aego-T satellite. To install the
wall brackets proceed as described below and illustrated in Diagram Two.

Note: It is very important that wall brackets are fitted securely. If you
are in any doubt about your ability to achieve a secure installation you
should seek professional advice and assistance.

The wall bracket is held to the wall via two screws inserted through elongated
holes in the bracket’s wall plate. No.8 (4.5mm) round-head, rather than
countersunk-head, screws should be used. The length of screw necessary and
type of wall fitting required will depend on the construction and condition
of the wall. If in any doubt seek professional advice.

Once the wall mounting locations for Aego-T satellites have been chosen use
the wall brackets themselves as templates to mark the screw positions. Loosen
the bracket adjustment screw using the allen key supplied and angle the
mounting post away from the wall plate to gain easier access to the holes.

With the screw holes drilled and appropriate wall fittings inserted, securely
screw the brackets to the wall and return the mounting post to the vertical.

Left

Front

Viewing/listening position

Right

Front

Centre

Left

Surround

Right

Surround

Alternative

or Extra Left

Surround

Alternative or

Extra Right

Surround

Subwoofer

Wall Plate

Mounting Post

Bracket Adjustment

Screw

Aego-T Wall Bracket

Aego-T Satellite and Wall
Bracket

Diagram One

4. Wall Brackets

Note: The elongated bracket holes enable some
adjustment for vertical alignment.

To attach an Aego-T satellite to a wall bracket
simply place the satellite above the bracket and
slide it onto the mounting post.

Note: Connecting cables to Aego-T satellites is best
done before they are mounted on wall brackets. See
Section 5.

Loosen the bracket adjustment screw to adjust the
satellites vertical angle. Turn the satellite on the
mounting post to adjust its lateral orientation.

AE12 Rev I

8/9/05, 2:35 pm

2