HiVi H4 - Manual (Page 2)

This speaker adopts fine packing material to protect it from damage during shipping. In
the box, you should find: speaker, power cable, connection cable, manual, warranty
card, and certificate.
II. Figures of speaker functions and electrical parts:
1.Tweeter
2.Woofer
3.Power switch/volume control
4.Amplifier back panel
5.RCA Input
6.Power socket
7.Rear port
8.HF: High Frequency
9.LF: Low Frequency
10.MF: Midrange Frequency
11.HP: Low Cut-off
12.Warranty card
13.User's manual
14.Connection cable
15.Power cable
I. Unpacking III. Speaker placement and environment
1. Speaker placement
H4 active speakers have an independent amplifier built into each speaker. When
configured as a 2.0 system, the speakers should be placed in front and to the Left /
Right of your listening position. When listening to music, the distance between the two
speakers should be over 85cm so that a natural sound field can be achieved. Adjust
the angle and distance of the subwoofer until optimal sound accuracy and imaging is
achieved.
2. Listening environment
In order to get best sound, not only do we recommend using high quality components
to match the speakers, but also a good listening environment. The placement and the
size of the listening area will influence the sound quality.
A few simple suggestions to optimize your listening environment:
a) Carpet the floor to avoid the sound reflection
b) Decorate the wall with cloth or other sound absorbing materials to improve sound
quality.
c) Use thick curtain to avoid the sound reflection by glass windows.
IV. Connecting system
In the back of the H4, there is a Power Socket, Audio In, and 4 sets of switches to
adjust the acoustic performance.