EZ Dupe DVD/CD & USB 10 copy Duplicator - Manual (Page 17)

16
9.2 Disc => Image: Transfers the information from the master CD/DVD disc to the
HDD. After the image(s) transfer is complete, the reader drive is ejected and the source
drive is changed to the HDD.
 Press
ENT 
 The source disc loaded to
HDD as image file, A001. 

Note: The Source Disc may be placed in the Reader Drive or any of the Writer Drives.
9.3 Set Reader Speed: Change the read speed (load speed) for the HDD. The speeds
for CD are: 1, 2, 4, 8, 10, 12, 16, 20, 24, 32, 36, 40, 44, 48, 52, 56 (default), MAX. The
speeds for DVD are: 1, 2, 2.4, 4, 6, 8, 10, 12, 16, 18, 20 (default), MAX.
 Press
ENT 
  or  to select
CD Read Speed and
press ENT to
confirm

  or  to select DVD Read
Speed
and press ENT to confirm
9.4 Show Image Info: Shows the image number in sequential order, the file name of the
image stored on the HDD, the type of image stored, and the amount of data the image
contains (in MB for DVD or time for CD).

Press
ENT

  or  to select
image and
press ENT to display info
9.5 Rename Image: Renames the image instead of using default file names (A001,
A002, etc.). Up to 8 characters.
 Press
ENT 
 Select the image
file to be
renamed and press
ENT 

  or  to
select character.
Press ENT to go to
the
next position. 
DVD disc image of
3.875GB as file A001
CD disc image of 65 min 28
sec as file A003