EZ Dupe Gold Premier 2 Copy DVD/CD Duplicator - Includes 500GB HDD+USB - Manual (Page 6)

5
8.9 ADVANCED SETUP
8.9.1 Power On Time
Sets system warm up time from 5 sec to 99 sec. Default is 15
seconds.
8.9.2 Startup Menu Assigns a command to be displayed first after the duplicator has
been initialized.
8.9.3 Skip Read Error Enables the option to halt the duplication process if there is an
error on the master disc. Disables the option to allow the process
to continue with the same errors as the master disc.
8.9.4 Change Bad
Master Disc
Enables or disables changing of a master disc during the copy
process when an error is detected on the master disc.
8.9.5 CD Overburn Enables or disables the duplication of overburned CDs.
8.9.6 Show HDD Image
Name
Allows the image name to be displayed on the LCD screen when
selecting the HDD as the source drive.
8.9.7 Keep Buffer To set enable or disable load source to the buffer.
8.9.8 Boot Password Sets password protection for machine boot-up.
8.9.9 Setup Password Sets password protection for changing setup options.
9. HDD Manager The management for various functions of the hard disk drive
(HDD).
Note: For this function and submenu to be displayed, a HDD must
be installed in the duplicator.
9.1 Select Image Selects an image file as a source to be copied to the discs.
9.2 Disc → Image Loads an image to the HDD from a master CD or DVD as an
Image file.
9.3 Set Reader Speed Sets the speed of data loading from the master CD or DVD to the
HDD.
9.4 Show Image Info. Displays the image file information such as image order, name, file
size and type of image.
9.5 Rename Image Renames the HDD image partition name up to 8 characters.
9.6 Delete Image Deletes an image file in HDD. Note: A file selected as the source
file cannot be deleted until a different image is selected. See 9.1.
9.7 HDD Info. Displays the information in HDD, such as the number of discs
stored on the HDD and the amount of space left in the HDD.
9.8 Format HDD Formats the HDD, erasing ALL data stored on the HDD.