NewAir G70 - Manual (Page 9)

9
Operation
Setting the Thermostat
Before connecting or 1.
disconnecting plug, turn
knob fully counterclockwise.
(Figure 4)
2. Heater is equipped with
a thermostat. to adjust
temperature to your individual
requirements, turn thermostat
control knob clockwise all
the way to turn heater on,
the yellow power light will
illuminate (Figure 5). When
room reaches desired
temperature, turn thermostat
knob counterclockwise until
you hear click. Leave in
this position to maintain
room temperature at this
setting. For additional heat,
turn clockwise until you
hear click again and heater
will turn on. to shut heater
off turn thermostat knob
counterclockwise all the way.
the yellow power indicator
light will turn off.
Figure 4
Thermostat control knob
(shown in off position)
Figure 5
Yellow light
Red light
!
NOTE: Heater is equipped
with a fan delay to dissipate
residual heat from the element.
Heater fan will run for a brief
period after heater has reached
room temperature.