Silverline 800W Angle Grinder 115mm - Manual (Page 9)

8
GB
• Run the grinder, with cup brush or wire wheel attached, for at least 30
seconds before use to check that the cup brush or wire wheel is secure,
and properly balanced
• When using a wire cup brush or wire wheel, avoid applying excess
pressure. Using greater force will not make the cup brush or wire wheel
more effective, but will bend the wires out of shape and damage the
brush
Accessories
A wide range of compatible accessories, including grinding, cutting and
flap discs, diamond wheels, wire cups and more, is available from your
Silverline stockist.
Maintenance
WARNING: Always remove the plug from the mains power supply before
carrying out any maintenance/cleaning.
Cleaning
• Keep your machine clean at all times. Dirt and dust will cause internal
parts to wear quickly, shortening the machine’s service life. Clean the
body of your machine with a soft brush, or dry cloth. If available, use
clean, dry, compressed air to blow through the ventilation holes
Brushes
• Over time the carbon brushes inside the motor may become worn
• Excessively worn brushes may cause loss of power, intermittent failure,
or visible sparking
• If you suspect that the brushes may be worn, have them replaced at an
authorised service centre
Disposal
Always adhere to national regulations when disposing of power tools that
are no longer functional and are not viable for repair.
• Do not dispose of power tools, or other waste electrical and electronic
equipment (WEEE), with household waste
• Contact your local waste disposal authority for information on the correct
way to dispose of power tools
563709_Z1MANPRO1.indd 8 05/03/2013 11:49